CHECK HARNESS BETWEEN HEADLIGHT BEAM LEVELER CONTROL MODULE AND INDICATOR BULB.

1) Turn the ignition switch to OFF.

2) Disconnect the connector of ECM.

3) Disconnect the combination meter connector.

4) Check for continuity between headlight beam leveler control module and combination meter.

Connector & terminal

(B150) No. 6 — (i10) No. 7:

QUESTION
Is there continuity?
Yes	No
Replace the headlight beam leveler control module.	Repair the open circuit or poor contact of the connector in the harness between the headlight beam leveler control module and indicator.