| CHECK DOOR SWITCH. |
|
1) Prepare the Subaru Select Monitor kit. 2) Turn the ignition switch to ON (engine OFF) and run the “PC application for Subaru Select Monitor”. 3) On «System Selection Menu» display, select {Integ. unit mode}. 4) Select the {Current Data Display & Save}. 5) Select the {Driver’s door SW input}, {P-door SW input}, {Rear right door SW input}, {Rear left door SW input}, and {R Gate SW input}. |
| QUESTION | |
|
Does the display switch between OFF ⇔ ON when each door or rear gate is opened/closed? | |
| Yes | No |
|
The door and rear gate latch switch are normal. |
|
