| CHECK IG RELAY 1 (PUSH BUTTON START) POWER SUPPLY. |
|
1) Remove the IG relay 1 (push button start). 2) Turn the ignition to ON. 3) Measure the voltage between the IG relay 1 (push button start) connector and chassis ground. Connector & terminal (B425) No. 34 (+) — Chassis ground (−): (B425) No. 36 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Check the following item and repair or replace if necessary. • Blown out of fuse • Open circuit or short circuit to ground in harness between IG relay 1 (push button start) connector and power supply CM • Open circuit or short circuit to ground in harness between IG relay 1 (push button start) connector and battery |
