| CHECK POWER SUPPLY FOR CLUTCH SWITCH. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from clutch switch. 3) Turn the ignition switch to ON. 4) Measure the voltage between clutch switch connector and chassis ground. Connector & terminal (B107) No. 1 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Check the following item and repair or replace if necessary. • Open circuit in power supply circuit • Short circuit to ground in power supply circuit • Blown out of fuse (No. 4) • Poor contact of joint connector |
