| CHECK COMMON RAIL PRESSURE SENSOR. |
|
1) Disconnect the connector from the common rail pressure sensor. 2) Measure the resistance between common rail pressure sensor terminals. Terminals No. 1 — No. 2: No. 2 — No. 3: |
| QUESTION | |
|
Is the resistance No. 1 — No. 2: approx. 13.7 kΩ and No. 2 — No. 3: approx. 2.5 kΩ? | |
| Yes | No |
|
The circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again. |
Replace the common rail assembly. |