| CHECK ACCELERATOR PEDAL POSITION SENSOR OUTPUT. |
|
1) Measure the voltage between accelerator pedal position sensor connector and chassis ground. Connector & terminal (B315) No. 6 (+) — Chassis ground (−): (B315) No. 3 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the difference between the measured value of main accelerator pedal position sensor signal and the measured value of sub accelerator pedal position sensor signal 0 V? | |
| Yes | No |
|
Replace the accelerator pedal. |
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between ECM connector and accelerator pedal position sensor connector. • Short circuit to ground in harness between ECM connector and accelerator pedal position sensor connector |
