| CHECK HARNESS BETWEEN ECM AND POWER SUPPLY CM. |
|
1) Turn the ignition to OFF. 2) Disconnect the connector from ECM. 3) Turn the ignition to ON. 4) Measure the voltage between ECM connector and chassis ground. Connector & terminal (B134) No. 27 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the short circuit to power supply in harness between ECM connector and power supply CM connector. |
Repair the poor contact of ECM connector. |