CHECK PUSH BUTTON IGNITION SWITCH.

1) Depress the brake pedal (AT model) or clutch pedal (MT model).

NOTE:

For AT model, position the select lever in “P” range.

2) Check the push button ignition switch indicator.

QUESTION
Does the indicator turn to green?
Yes	No
	Check the brake signal circuit. (AT model) Check the following item and repair or replace if necessary. (MT model) • Blown-out of fuse (F/B No. 21) • Open circuit or short circuit to ground in harness between battery and clutch switch connector • Open circuit or short circuit to ground in harness between clutch switch connector and power supply CM • Poor contact of clutch switch