| CHECK POWER SUPPLY OF INTAKE CAMSHAFT POSITION SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the intake camshaft position sensor. 3) Turn the ignition switch to ON. 4) Measure the voltage between intake camshaft position sensor connector and engine ground. Connector & terminal (E35) No. 1 (+) — Engine ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Repair the open or ground short circuit of harness between main relay connector and intake camshaft position sensor connector. |
