| CHECK HARNESS BETWEEN ECM AND POWER SUPPLY CM. |
|
1) Turn the ignition to OFF. 2) Disconnect the connectors from the ECM. 3) Turn the ignition to ON. 4) Measure the voltage between ECM and chassis ground. Connector & terminal (B136) No. 34 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
Repair the short circuit to power supply in harness between ECM and power supply CM. |
Repair the poor contact of the ECM connector. |