| CHECK HARNESS BETWEEN ECM AND ENGINE COOLANT TEMPERATURE SENSOR CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM and engine coolant temperature sensor. 3) Measure the resistance between ECM and chassis ground. Connector & terminal (B137) No. 11 — Chassis ground: |
| QUESTION | |
|
Is the resistance 1 MΩ or more? | |
| Yes | No |
|
Replace the engine coolant temperature sensor. |
Repair the ground short circuit of the harness between the ECM and engine coolant temperature sensor. |
