CHECK INPUT VOLTAGE OF STARTER RELAY.

1) Remove the starter relay.

2) Connect the connector to ignition switch.

3) Turn the ignition switch to START.

4) Measure the voltage between starter relay connector and chassis ground.

Connector & terminal

LHD model

(B225) No. 9 (+) — Chassis ground (−):
(B225) No. 11 (+) — Chassis ground (−):

RHD model

(B225) No. 23 (+) — Chassis ground (−):
(B225) No. 25 (+) — Chassis ground (−):

QUESTION
Is the voltage 10 V or more?
Yes	No
	Check the following item and repair or replace if necessary. • Blown out of fuse • Open circuit in harness between starter relay connector and ignition switch connector • Poor contact of joint connector (RHD model)