| CHECK HARNESS BETWEEN ECM AND STARTER RELAY CONNECTOR. |
|
1) Turn the ignition to OFF. 2) Disconnect the connectors from the ECM. 3) Remove the starter relay. 4) Measure the resistance of harness between ECM and starter relay connector. NOTE: For AT model, place the select lever in “P” or “N” range. Connector & terminal (B135) No. 13 — (B225) No. 10: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of harness between ECM and starter relay connector. |
