| CHECK POWER SUPPLY OF CAMSHAFT POSITION SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the camshaft position sensor. 3) Turn the ignition switch to ON. 4) Measure the voltage between camshaft position sensor connector and engine ground. Connector & terminal (E35) No. 1 (+) — Engine ground (−): |
| QUESTION | |
|
Is the voltage 10 V or more? | |
| Yes | No |
|
|
Repair the open or ground short circuit of harness between main relay connector and camshaft position sensor connector. |
