| CHECK WIRING HARNESS. |
|
1) Disconnect the power supply CM connector and the IG relay 1 and 2 (push button start). 2) Using a tester, check continuity between power supply CM connector and IG relay 1 (push button start) or IG relay 2 (push button start). Connector & terminal (B420) No. 35 — (B425) No. 38: (B420) No. 34 — (B425) No. 34: |
| QUESTION | |
|
Is there continuity? | |
| Yes | No |
|
|
Repair or replace the open circuit of harness. |
