| CHECK WIRING HARNESS. |
|
1) Disconnect the power supply CM connector and the push button ignition switch. 2) Using a tester, check continuity between the power supply CM connector and push button ignition switch. Connector & terminal (B423) No. 7 — (B420) No. 14: (B423) No. 2 — (B420) No. 37: |
| QUESTION | |
|
Did it change to continuity exists, when the button was pressed? | |
| Yes | No |
|
Replace the push button ignition switch. |
Repair or replace the open circuit of harness. |
