CHECK HARNESS BETWEEN KEY WARNING SWITCH AND BODY INTEGRATED UNIT.

1) Disconnect the key warning switch harness connector.

2) Disconnect the harness connector from the body integrated unit.

3) Measure the resistance between the key warning switch harness connector and body integrated unit harness connector terminals.

Connector & terminal

(B350) No. 4 — (B279) No. 2:

QUESTION

Is the resistance less than 10 Ω?

Yes No

Replace the body integrated unit, Replace all ignition keys (including the transponder). Execute the registration procedure next. Refer to the “PC application help for Subaru Select Monitor”.

Repair the harness between the key warning switch and body integrated unit.