| CHECK GROUND CIRCUIT OF FUEL PUMP. |
|
1) Turn the ignition switch to OFF. 2) Remove the fuel pump access hole lid. 3) Disconnect the connector from fuel pump. 4) Measure the resistance of harness between fuel pump connector and chassis ground. Connector & terminal (R58) No. 6 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 5 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between fuel pump connector and chassis grounding terminal • Poor contact of coupling connector |
