CHECK POWER SUPPLY CIRCUIT FOR IGNITION COIL AND IGNITOR ASSEMBLY.

1) Turn the ignition switch to OFF.

2) Disconnect the connector from the ignition coil and ignitor assembly.

3) Turn the ignition switch to ON.

4) Measure the voltage between ignition coil and ignitor assembly connector and engine ground.

Connector & terminal

(E12) No. 2 (+) — Engine ground (−):

QUESTION

Is the voltage 10 V or more?

Yes No

Repair the harness and connector.

NOTE:

In this case, repair the following item:

• Open circuit of harness between the ignition coil and ignitor assembly connector and main relay connector

• Poor contact of coupling connector

• Blown out of fuse