CHECK HARNESS BETWEEN ECM AND FUEL INJECTOR.

1) Turn the ignition switch to OFF.

2) Disconnect the connector from fuel injector on faulty cylinders.

3) Turn the ignition switch to ON.

4) Measure the voltage between the ECM and chassis ground for faulty cylinders.

Connector & terminal

#1 (B137) No. 8 (+) — Chassis ground (−):

#2 (B137) No. 9 (+) — Chassis ground (−):

#3 (B137) No. 10 (+) — Chassis ground (−):

#4 (B137) No. 11 (+) — Chassis ground (−):

QUESTION

Is the voltage 10 V or more?

Yes No

Repair the short circuit to power in the harness between the ECM and fuel injector.