| CHECK ACCELERATOR PEDAL POSITION SENSOR OUTPUT. |
|
1) Measure the voltage between accelerator pedal position sensor connector and chassis ground. Connector & terminal (B315) No. 6 (+) — Chassis ground (−): (B315) No. 3 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the difference in measured values for the main accelerator pedal position sensor signal and the sub accelerator pedal position sensor signal 0 V? | |
| Yes | No |
|
Replace the accelerator pedal. |
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit of harness between the ECM and accelerator pedal position sensor connector. • Ground short circuit of harness between the ECM and accelerator pedal position sensor connectors. • Poor contact of coupling connector |
