| CHECK HARNESS BETWEEN ECM AND NEUTRAL POSITION SWITCH CONNECTOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from ECM and neutral position switch. 3) Measure the resistance of harness between ECM and neutral position switch connector. Connector & terminal (B136) No. 31 — (B25) No. 2: (B136) No. 6 — (B25) No. 1: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between ECM and neutral position switch connector • Poor contact of coupling connector |
