| CHECK HARNESS BETWEEN ECM AND FRONT OXYGEN (A/F) SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between ECM and front oxygen (A/F) sensor connector. Connector & terminal (B136) No. 2 — (E23) No. 4: (B136) No. 3 — (E23) No. 4: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the harness and connector. NOTE: In this case, repair the following item: • Open circuit in harness between ECM and front oxygen (A/F) sensor • Poor contact of coupling connector |
