| CHECK OPEN CIRCUIT OF HARNESS. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the VDCCM&H/U. 3) Depress the brake pedal. 4) Measure the voltage between VDCCM&H/U connector and chassis ground. Connector & terminal (B310) No. 30 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 10 — 15 V? | |
| Yes | No |
|
|
Repair the harness between stop light switch and VDCCM&H/U connector. |
