| CHECK HARNESS CONNECTOR BETWEEN VDCCM&H/U AND CHASSIS GROUND. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the VDCCM&H/U. 3) Measure the resistance of harness between VDCCM&H/U connector and chassis ground. Connector & terminal (B310) No. 25 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 0.5 Ω? | |
| Yes | No |
|
|
Repair the open circuit of VDCCM&H/U ground harness and poor contact of connector. |
