| CHECK LINE PRESSURE LINEAR SOLENOID (IN TRANSMISSION). |
|
1) Remove the transmission connector from bracket. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the oil pan, and disconnect the connector from control valve body. 4) Measure the resistance of line pressure linear solenoid connector terminals. Connector & terminal (AT2) No. 5 — No. 10: |
| QUESTION | |
|
Is the resistance 4 — 8 Ω? | |
| Yes | No |
|
|
Replace the control valve body. |
