| CHECK 2-4 BRAKE DUTY SOLENOID (IN TRANSMISSION). |
|
1) Remove the transmission connector from bracket. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the oil pan, and disconnect the connector from control valve body. 4) Measure the resistance of harness between 2-4 brake duty solenoid connector and transmission ground. Connector & terminal (AT2) No. 8 — Transmission ground: |
| QUESTION | |
|
Is the resistance 2.0 — 6.0 Ω? | |
| Yes | No |
|
|
Replace the control valve body. |
