| CHECK BETWEEN THE AIRBAG CONTROL MODULE AND CHASSIS GROUND. |
|
1) Turn the ignition switch to OFF. 2) Measure the resistance between connector (2AG) in the test harness AG and chassis ground. Connector & terminal (2AG) No. 4 — Chassis ground: (2AG) No. 3 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 10 Ω? | |
| Yes | No |
|
|
Repair the harness between the airbag control module and the chassis ground. Or replace the airbag main harness along with the bulkhead harness. |
