EXTERIOR BODY PANELS > Door Sash Tape
1. Disconnect the ground cable from battery.
6. Remove the glass run rubber.
7. Remove the clip at the top of the B-pillar and the front door weather strip.
8. Remove the screw to remove the front door weather strip, outer.
CAUTION:
• Be careful not to scratch the vehicle when removing the weather strip, outer.
• Always replace the weather strip, outer with a new part if it appears to be deformed.
9. Remove the door sash tape from the door sash.
NOTE:
• If the tape is difficult to remove, heat with a hair dryer or similar device to make removal easier.
Use a household dryer. Do not use an industrial dryer.
• Completely clean off any tape that has remained adhered to the door sash.
1. Disconnect the ground cable from battery.
5. Remove the glass run rubber.
6. Remove the clip at the top of the B-pillar and the rear door weather strip.
7. Remove the screws and clip to remove the gusset cover, outer.
8. Remove the rear door weather strip, outer.
CAUTION:
• Be careful not to scratch the vehicle when removing the weather strip, outer.
• Always replace the weather strip, outer with a new part if it appears to be deformed.
9. Remove the door sash tape from the door sash.
NOTE:
• If the tape is difficult to remove, heat with a hair dryer or similar device to make removal easier.
Use a household dryer. Do not use an industrial dryer.
• Completely clean off any tape that has remained adhered to the door sash.