1. Put a wooden block on jack and place the front door on that.
2. Apply grease to the sliding area of door hinges, and install the door hinge to vehicle.
3. Install the front door to upper hinge and lower hinge adjusting by jack.
4. Tighten bolt of door checker.
5. Connect door harness connector, and install the instrument panel lower cover.
6. Install the front pillar lower trim.
Tightening torque:
Refer to “COMPONENT” of “General Description”. 
7. Install while paying attention to maintaining a uniform clearance around the front door panel. For the dimension of clearance, refer to “SPECIFICATION” in “General Description”.