1. Remove the clip inside the wheel house.
2. Remove the bolt.
3. Remove the clips on the lower side of rear bumper.
4. Remove the rear bumper from vehicle body.
(1) Detach from the fender side in order from (1) to (3) while pulling up on the bumper face and twisting it towards you. (Both sides)
(2) Detach from the fender side in order from (4) to (6) while pulling up on the center part of the bumper face.
CAUTION:
Do not pull with a excessive force. Otherwise the bracket installation area may be damaged.
5. Remove the reflectors.
1. Remove the rear bumper face. 
2. Remove the nuts, and remove the bumper beam reinforcement from the vehicle body.
NOTE:
After all nuts are removed, raise the whole bumper beam reinforcement a little to remove it from the vehicle body.
Remove the rear bumper face from vehicle body, and remove each bumper bracket.
