CAUTION:
When installing the sunroof motor assembly, be careful not to move the sunroof cable.
1. Install the sunroof motor.
2. Connect the sunroof motor harness connector of motor assembly, and then connect the battery ground cable to battery.
3. Reset the sunroof motor. 
4. Check the sunroof operation as follows:
|
Inspection order |
Switch position |
|
(1) Sunroof closes completely. |
Close |
|
(2) Sunroof opens 500 mm (19.7 in) away from completely closed position. |
Open |
|
(3) Sunroof opens completely. |
Open |
|
(4) Sunroof closes 200 mm (7.87 in) in front of the completely closed position. |
Close |
|
(5) Sunroof closes completely. |
Close |
5. Install the roof trim.