CAUTION:
• Make sure there are no mistakes in the routing of harnesses such as those for the side airbag and inner seat belt harnesses. Incorrect harness routing during assembly can result in pinched harnesses or short circuits.
• When installing the side airbag module assembly, be sure to install it by inserting the side airbag module between the backrest cover and airbag guide cloth.
|
(A) |
Airbag guide cloth |
|
(B) |
Backrest cover |
|
(C) |
Side airbag module ASSY |
|
(1) |
Backrest frame ASSY |
|
(2) |
Airbag guide cloth |
|
(3) |
Backrest cover |
|
(4) |
Side airbag module ASSY |
|
(5) |
Hexagon cap nut |
When the backrest cover is not installed securely, the side airbag module may not be deployed properly, therefore keep strictly to the following procedure.
• Be careful not to stain or damage the backrest cover during assembly.
• Always use new hog ring.
• Secure the hog ring using hog ring pliers.
• Install the hog rings to the specified points securely and make sure that no wrinkle or twisting on backrest cover.
Assemble in the reverse order of disassembly.
Tightening torque:
Refer to “COMPONENT” of “General Description”. 