1. Remove the rear door trim. 
2. Remove the sealing cover.
3. Operate the power window switch to move the glass, and remove the two bolts.
4. Remove the glass from the carrier plate, and while supporting the glass, lower the carrier plate alone to the lowest position.
CAUTION:
Without the carrier plate lowered to the bottom most position, do not lower the glass by itself to the lowest position within the door panel. Otherwise the glass may come off of the sash and become damaged.
5. Carefully lower the glass to the lowest position of the door panel.
6. Remove the bolt and nuts and remove the sash. (Remove the upper attachment point first.)
7. Remove the glass run rubber.
8. Remove the door glass while tilting.
CAUTION:
Avoid impact and damage to the glass.
