1. Connect the ground cable to battery.
2. To confirm that the motor is at the auto stop position, connect the harness to the motor, and turn the wiper switch ON/OFF.
3. Disconnect the ground cable from battery.
4. Install the wiper motor assembly.
Tightening torque:
Refer to “COMPONENT” of “General Description”. 
5. Tighten the nut of the link plate and motor assembly.
Tightening torque:
Tighten at 8.5 N·m (0.87 kgf-m, 6.3 ft-lb) for 115°.
CAUTION:
Tighten the nut where rod (A) and link plate (B) is aligned in a straight line.
6. Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Description”.