CAUTION:
• Make sure that the water stop gasket of the cover attachment area is securely attached.
• Install the sensor at the position shown in the figure below.
• LHD model
|
(1) |
148 mm (5.83 in) from the upper end of the fins |
|
(2) |
The 6th column fin from the left end |
|
(3) |
Sensor |
|
(4) |
Evaporator |
• RHD model
|
(1) |
148 mm (5.83 in) from the upper end of the fins |
|
(2) |
The 6th column fin from the right end |
|
(3) |
Sensor |
|
(4) |
Evaporator |
1. Install in the reverse order of removal.
2. Fill engine coolant. 
3. Charge refrigerant.