WARNING:
Always refer to “Airbag System” before performing service on the airbag modules. 
1. Align the center position of the roll connector.
2. Install in the reverse order of removal.
NOTE:
Align the alignment marks on the steering wheel and steering shaft.
Tightening torque:
39 N·m (4.0 kgf-m, 28.8 ft-lb)
Column cover-to-steering wheel clearance:
2 — 4 mm (0.08 — 0.16 in)
CAUTION:
Insert the roll connector guide pin into the guide hole on the lower end of the steering wheel surface. Avoid damaging the pin.