Selection of main shaft rear plate:
Using the ST, measure the protrusion amount (A) of ball bearing from transmission main case surface, and select a suitable plate in the following table.
NOTE:
Before measuring, tap the end of main shaft with a plastic hammer lightly in order to make the clearance zero between the main case surface and moving flange of bearing.
| ST 498147001 | DEPTH GAUGE |
|
Dimension (A) mm (in) |
Part No. |
Mark |
|
4.00 — 4.13 (0.1575 — 0.1626) |
32294AA041 |
1 |
|
3.87 — 4.00 (0.1524 — 0.1575) |
32294AA051 |
2 |
|
(A) |
Measured value |