1. Select the appropriate reverse shifter fork from the table below, and adjust until the clearance between the reverse idler gear and reverse coupling sleeve is within specification.
Clearance (a):
0.50 — 0.85 mm (0.020 — 0.033 in)
|
(a) |
Measured value |
|
(A) |
Reverse idler gear |
|
(B) |
Reverse coupling sleeve |
|
Reverse shifter fork | ||
|
Part No. |
Mark |
Contents |
|
32941AA020 |
2 |
Approaches reverse idler gear by 0.3 mm (0.012 in). |
|
32941AA030 |
No mark |
Standard |
|
32941AA040 |
1 |
Approaches reverse idler gear No. 2 by 0.3 mm (0.012 in). |
2. Select the appropriate reverse idler gear bushing from the table below, and adjust until the clearance between the reverse idler gear and reverse idler gear washer is within specification.
Clearance:
0.1 — 0.3 mm (0.004 — 0.012 in)
|
Reverse idler gear bushing | ||
|
Part No. |
Length mm (in) |
Groove for identification |
|
32289AA010 |
38.0 (1.496) |
No |
|
32289AA020 |
38.1 (1.500) |
1 |
|
32289AA030 |
38.2 (1.504) |
2 |
|
32289AA040 |
38.3 (1.508) |
3 |
|
32289AA050 |
38.4 (1.512) |
4 |
|
32289AA060 |
38.5 (1.516) |
5 |
|
32289AA070 |
38.6 (1.520) |
6 |