1. Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N·m (5.9 kgf-m, 42.8 ft-lb)
2. Install the intercooler.
3. Connect the ground cable to battery.
2. CROSSMEMBER AND CUSHION RUBBER
1. Install the transmission cushion rubber to the transmission, and tighten the bolt (A).
2. Attach the transmission cushion rubber to the center crossmember, and tighten nut (B).
Tightening torque:
Bolt (A)
35 N·m (3.6 kgf-m, 25.8 ft-lb)
Nut (B)
35 N·m (3.6 kgf-m, 25.8 ft-lb)
3. Install the front crossmember and rear crossmember.
Tightening torque:
T1: 70 N·m (7.1 kgf-m, 51.6 ft-lb)
T2: 140 N·m (14.3 kgf-m, 103.3 ft-lb)
4. Remove the transmission jack.
5. Install the transmission under cover.
6. Install the heat shield cover.
7. Install the exhaust pipe and muffler.
8. Lower the vehicle.
9. Connect the ground cable to battery.