1. Bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit noise in rotation after gear oil lubrication.
2. Drive gear
If the drive gear tooth surface and shaft are excessively broken or damaged, replace the drive gear.
3. Measure the clearance between snap ring and inner race of ball bearing with a thickness gauge.
Clearance:
0.01 — 0.15 mm (0.0004 — 0.0059 in)
If the measurement is not within specification, select a suitable snap ring and replace it.
|
Snap ring (Outer-30) | |
|
Part No. |
Thickness mm (in) |
|
805030041 |
1.53 (0.0602) |
|
805030042 |
1.65 (0.0650) |
|
805030043 |
1.77 (0.0697) |