1. Install the ATF cooler assembly to the transmission.
Tightening torque:
23 N·m (2.3 kgf-m, 17.0 ft-lb)
2. Connect the engine coolant inlet hose to the cylinder block.
3. Disconnect the ATF cooler hoses from the pipes of the transmission side.
|
(A) |
Inlet hose |
|
(B) |
Outlet hose |
4. Install the engine harness bracket.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
5. Connect the engine coolant outlet hose.
6. Attach the harness connector to the bracket, and connect the harness.
7. Install the air intake chamber and intake boot. 
8. Fill engine coolant.
9. Check the ATF level.