1. Set the range select lever to the “P” range.
2. Using a plastic hammer, install the reduction driven gear assembly and the new washer, and tighten the new drive pinion lock nut.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
|
(A) |
Reduction driven gear |
|
(B) |
Reduction drive gear |
3. After tightening, stake the lock nut securely.
4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. 
5. Install the transmission assembly to the vehicle.