1. Set the vehicle on a lift.
2. Set the select lever to “N” range.
3. Lift up the vehicle.
4. Remove the front and center exhaust pipes. (non-turbo model) 
5. Remove the center exhaust pipe. (turbo model)
6. Remove the snap pin and washer from the shifter arm.
|
(A) |
Shifter arm |
|
(B) |
Snap pin |
|
(C) |
Select cable |
|
(D) |
Washer |
7. Remove the plate assembly from the transmission case.
|
(A) |
Select cable |
|
(B) |
Plate ASSY |
8. Remove the spring pin and remove the shifter arm.
| ST 398791600 | REMOVER |
|
(A) |
Spring pin |
|
(B) |
Shifter arm |
9. Remove the two inhibitor switch securing bolts.
|
(A) |
Inhibitor switch |
10. Remove the inhibitor switch from the transmission.
|
(A) |
Inhibitor switch |
11. Disconnect the inhibitor switch harness connector from the inhibitor switch.