1. Connect the inhibitor switch harness connector to the inhibitor switch.
2. Install the inhibitor switch to the transmission case.
|
(A) |
Inhibitor switch |
3. Install the shifter arm and fix with a new spring pin.
|
(A) |
Spring pin |
|
(B) |
Shifter arm |
4. Move the shifter arm to the neutral position.
5. Using the ST, tighten the two bolts holding the inhibitor switch.
| ST 499267300 | STOPPER PIN |
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
|
(A) |
Inhibitor switch |
|
(B) |
Shifter arm |
6. Install the select cable to the shifter arm.
7. Install the plate assembly to the transmission.
Tightening torque:
T: 25 N·m (2.5 kgf-m, 18.4 ft-lb)
|
(A) |
Select cable |
|
(B) |
Plate ASSY |
8. Install the washer and snap pin to the shifter arm.
|
(A) |
Shifter arm |
|
(B) |
Snap ring |
|
(C) |
Select cable |
|
(D) |
Washer |
9. Install the front and center exhaust pipes. (non-turbo model)
10. Install the center exhaust pipe. (turbo model)
11. Lower the vehicle.
12. Inspect the inhibitor switch.