1. Lift up the vehicle.
2. Remove the differential gear oil drain plug using TORX® bit T70, and drain the differential gear oil completely.
CAUTION:
• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to receive burns.
• Be careful not to spill differential gear oil on the exhaust pipe to prevent it from emitting smoke or causing a fire. If differential gear oil is spilled on the exhaust pipe, wipe it off completely.
3. Replace the gasket with a new part and tighten the differential gear oil drain plug using the TORX® bit T70.
Tightening torque:
44 N·m (4.5 kgf-m, 32.5 ft-lb) (Aluminum gasket silver)
70 N·m (7.1 kgf-m, 51.6 ft-lb) (Copper gasket brown)
70 N·m (7.1 kgf-m, 51.6 ft-lb) (Metal gasket black)
|
(A) |
Oil pan |
|
(B) |
Differential oil drain plug |
4. Lower the vehicle.
5. Fill the differential with differential gear oil from the level gauge hole.
Recommended gear oil:
Gear oil capacity:
1.1 — 1.3 L (1.2 — 1.4 US qt, 1.0 — 1.1 Imp qt)
6. Check the level of differential gear oil.