1. Install the shift bracket and MT gear shift cable as a single unit to the transmission body.
|
(A) |
MT gear shift cable |
|
(B) |
Shift bracket |
CAUTION:
• Do not bend the MT gear shift cable sharply.
• When replacing the new MT gear shift cable, secure it to shift bracket with the clamps, be careful not to mistake the installing direction.
|
(A) |
Old MT gear shift cable |
|
(B) |
New MT gear shift cable |
|
(C) |
Shift bracket |
2. Tighten the shift bracket with specified torque.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
|
(A) |
Shift bracket |
3. Install the washer and snap pin to the shift lever COMPL.
|
(A) |
Snap pin |
|
(B) |
Washer |
4. Install the dust cover to the transmission body.
Tightening torque:
15 N·m (1.5 kgf-m, 11.1 ft-lb)
5. Insert the MT gear shift cable into cable cover assembly, and secure it with the clamp.
|
(A) |
Clamp |
|
(B) |
MT gear shift cable |
6. Connect the MT gear shift cable.
7. Attach the cable cover plate.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
8. Insert the MT gear shift cable into cable clamp, and install to the transmission.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
|
(A) |
Cable clamp |
9. Install the heat shield cover.
10. Install the exhaust pipe and muffler. 
11. Lower the vehicle.
12. Install the intercooler stay.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
13. Install the intercooler.
14. Make sure the gears can be shifted accurately into each gear.