1. Set the vehicle on a lift.
2. Disconnect the ground cable from battery.
3. Remove the gear shift knob.
4. Remove the console box. 
5. Remove the console front panel.
|
(A) |
Hook |
6. Remove the clamp.
7. Remove the boot and insulator assembly.
8. Remove the harness clamp from the plate COMPL.
9. Remove the plate COMPL from the vehicle body.
10. Lift up the vehicle.
11. Remove the rear exhaust pipe and muffler.
• Non-turbo model
• Turbo model
12. Remove the heat shield cover.
13. Remove the stay from transmission bracket.
|
(A) |
Stay |
|
(B) |
Transmission bracket |
14. Remove the rod from joint.
|
(A) |
Stay |
|
(B) |
Rod |
15. Remove the cushion rubber from the vehicle body.
|
(A) |
Stay |
|
(B) |
Cushion rubber |
16. Extract the spring pin and remove the joint.
|
(A) |
Joint |
|
(B) |
Spring pin |
17. Lower the vehicle.
18. Remove the gear shift lever.
1. Set the vehicle on a lift.
2. Disconnect the ground cable from battery.
3. Lift up the vehicle.
4. Remove the exhaust pipe (front).
5. Remove the heat shield cover.
6. Remove the cable cover plate.
7. Disconnect the MT gear shift cable and MT gear select cable from the gear shift lever assembly.
CAUTION:
Be careful not to deform the cable inner.
(1) Pull out down the MT gear shift cable to spread the spring.
(2) Push the MT gear select cable in the direction of arrow, and remove it.
|
(A) |
MT gear shift cable |
|
(B) |
MT gear select cable |
8. Remove the cable cover assembly.
9. Lower the vehicle.
10. Remove the gear shift knob.
11. Remove the console box.
12. Remove the console front panel.
|
(A) |
Hook |
13. Remove the gear shift lever assembly mounting bolt and remove the gear shift lever assembly from the vehicle.
