1. INSPECT THE SPECIFIED POSITION
1. If the stop light switch does not operate properly (or if it is not secured at the specified position), replace with a new part.
Specified position L:
2 mm (0.079 in)
2. Measure the clearance between the threaded end of stop light switch and the stopper.
CAUTION:
Be careful not to rotate the stop light switch.
Stop light switch clearance A:
0.3 mm (0.012 in)
|
(1) |
Stop light switch |
|
(2) |
Stopper |
|
(3) |
Brake pedal |
3. If it is not within the specification, adjust the position of the stop light switch.
CAUTION:
Be careful not to rotate the stop light switch.
1. If the stop light switch does not operate properly, replace with a new part.
• Model with cruise control
Measure the resistance of stop light switch.
|
Switch |
Pedal |
Terminal No. |
Standard |
|
Stop light |
Released |
2 and 3 |
1 MΩ or more |
|
Depressed |
Less than 1 Ω |
• Model without cruise control
Measure the resistance of stop light switch.
|
Switch |
Pedal |
Terminal No. |
Standard |
|
Stop light |
Released |
1 and 2 |
1 MΩ or more |
|
Depressed |
Less than 1 Ω |