1. Remove the steering column. 
2. Disconnect the connector from clutch switch.
3. Disconnect the connector from stop light switch.
4. Remove the clevis pin which secures the pedal and operating rod.
|
(1) |
Clevis pin |
|
(2) |
Snap pin |
|
(3) |
Operating rod |
|
(4) |
Pedal |
5. Remove the nut which secures the clutch master cylinder.
6. Remove the bolt and nut which secures the pedal bracket.
1. Disconnect the connector from stop light switch.
2. Remove the clevis pin which secures the brake pedal and operating rod.
|
(1) |
Clevis pin |
|
(2) |
Snap pin |
|
(3) |
Operating rod |
|
(4) |
Brake pedal |
3. Remove the bolt and nut which secures the brake pedal bracket.
